<del id="ppdtr"></del>
<var id="ppdtr"></var><listing id="ppdtr"></listing>
<var id="ppdtr"></var>
<listing id="ppdtr"></listing>
<var id="ppdtr"></var>
<del id="ppdtr"></del>
<del id="ppdtr"></del>
<listing id="ppdtr"></listing><var id="ppdtr"></var><var id="ppdtr"></var><var id="ppdtr"></var>
<listing id="ppdtr"></listing><listing id="ppdtr"></listing>
<del id="ppdtr"></del><listing id="ppdtr"></listing>
返回首頁  |  收藏本站 | 網站地圖
首頁 新聞資訊 產品中心
耐火磚知識與新聞
8 耐火材料行業知識
8 耐火材料行業動態
8 耐火磚知識與新聞
當前位置:河南宏泰窯爐耐火澆注料廠 > 新聞資訊 > 耐火磚知識與新聞 >
耐火磚知識與新聞

耐火磚砌筑說明(中英文版)

為使窯襯材料充分發揮效能,確保窯襯材料的使用周期,延長使用壽命,對耐火磚砌筑做了以下規定:

1、仔細清掃窯殼內壁的灰塵及渣屑;

2、窯殼內應平整沒有凹凸不平現象;

3、磚與磚之間灰縫控制在1.5mm~2mm;

4、膠泥的涂抹要均勻飽滿,不要有缺漿現象。均勻的涂抹膠泥,且用砌體搓動膠泥,使膠泥能微量擠出;

5、窯襯的砌筑要平整不能有錯臺,應力求避免錯位、傾斜、灰縫不均、離中、重縫、通縫、張口、脫空、毛縫、蛇形彎、砌體鼓包以及混漿等通;

6、耐火磚襯中的膨脹縫,必須按設計留設,不得遺漏;

7、重要部位和外形復雜部位的襯里應先進行預砌筑;

8、鎖縫要牢固。加工磚時要用切磚機對磚進行精細加工,不得使用手工加工磚;在回轉窯內及托磚板下的封頂磚應不小于原磚的70%;在平面的接頭磚和彎道磚中,不得小于原磚的1/2。必須用原磚鎖口。磚的加工面不宜朝向爐膛內側。

9、耐火材料必須在干燥庫房內存放。

河南耐火材料廠 http://www.thegamerbuzz.com

The instruction of the refractory brickss masonry

    

In order to make the materical of kiln liner function fully and ensure its turnaround, prolong service life, making following provisions for the masonry:

1、Sweep carefully the dust and crumbs on the inside wall of kiln shell.

2、Inside wall of kiln shell should be level up and no irregularity phenomenon.

3、The mortar joint between brick and brick is controlled 1.5mm2mm.

4、Mortar smear should be even and full. Don’t  hane thelack of the mortar phenomenon. You should smear well the mortar.And you twist mortar with brickwork to extrude a litter mortar.

5、Masonry of kiln liner must be level up and no slab staggering .You should do your best to avoid malposition, lean, mortar joint uniformity, decentring, hemstitch, straight joint, yawn, bursted, raw seam, warp form the shape of the snake, humping and the mortar is unwell, etc are common faults.

6、According to design, the expansion gap of firebrick must remain. You cannot omit.

7、You should masonry in advance in important and complex outline part of the klin lining.

8、Firm whipstich.You must process finely brick with brick cutter. Don’t  process brick with hand. Neck brick should be larger 70% than other brick. The last brick in one plane or the brick in a curve should be larger 50% than other brick. Must foreshaft with the same brick. The machined surface is not suitable to facing the inside hearth.

9、Refractory should be stored in dry warehouse.

ZHENGZHOU DENGDA REFRACTORY CO.,LTD

 



上一篇:
高鋁質隔熱耐火磚
下一篇:怎么計算耐火磚產量
相關文章:
·4月份全國堿性耐火制品進口均價大幅下降
·高鋁耐火磚的集中性能
·隔熱耐火磚有哪些分類?
·耐火磚的國家標準是什么?
·通用耐火磚的規格尺寸是多大?
·耐火磚與耐火材料的制造工藝密切相關
·耐火磚的體積密度如何計算?
·耐火磚與保溫磚的區別很大
·耐火磚與陶土燒結磚的區別是什么?
·水泥窯協同處理生活垃圾對水泥生產造成傷害怎么解決
聯系方式: *
備注

版權所有 備案號:豫ICP備12005776號 | 河南耐火材料廠 電話:13849089686
地址:河南省新密市超化鎮 主營耐火材料產品:耐火磚、高鋁磚、澆注料、電熔鋯剛玉磚系列
一级午夜福利免费区